News:

  • August 18, 2026, 07:30:31 AM

Login with username, password and session length

« previous next »
Pages: [1] 2

Author Topic: brx baby  (Read 39328 times)

maciek

  • Sr. Member
  • ****
  • Posts: 95
brx baby
« on: April 19, 2017, 08:33:49 PM »
my brx plc and click plc both have ethernet  and i am using 4 port unmanaged ethernet switch. can i connect to both of them at the same time.
right now if i want to connect to one i must disconnect from the other one they both have same ip
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #1 on: April 19, 2017, 08:39:06 PM »
Sure. They just need to have different IP addresses.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #2 on: April 19, 2017, 09:06:10 PM »
how does one accomplish that
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #3 on: April 19, 2017, 09:07:11 PM »
Quote from: maciek on April 19, 2017, 09:06:10 PM
how does one accomplish that

Setting the IP address?
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #4 on: April 19, 2017, 09:10:02 PM »
doesn't the device that one is trying connect have to have the same ip address as the computer?
 
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #5 on: April 19, 2017, 09:15:33 PM »
Just the opposite, they must all be unique. You should consider getting a book on IP network configuration. It's not that hard, but it is important that it is done currently.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #6 on: April 19, 2017, 09:30:15 PM »
what is a good easy book for dummy
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #7 on: April 19, 2017, 09:37:27 PM »
I just Googled "IP networking basics" and got several hits on free tutorials. Start there.
« Last Edit: April 20, 2017, 09:14:49 AM by BobO »
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #8 on: April 19, 2017, 11:07:03 PM »
my computer is connected to the internet wireless but i am using my ethernet lan  to connect to brx plc
do i need a wired internet connection to be able to send e mails?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #9 on: April 20, 2017, 09:18:22 AM »
Quote from: maciek on April 19, 2017, 11:07:03 PM
my computer is connected to the internet wireless but i am using my ethernet lan  to connect to brx plc
do i need a wired internet connection to be able to send e mails?

The PLC just needs to be able to 'see' the SMTP server or relay, wired or wireless isn't really relevant. Since you are wired to the PC and the PC is connected to the Internet, you might consider an SMTP relay program.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #10 on: April 21, 2017, 01:28:15 AM »
Logged

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #11 on: April 21, 2017, 01:37:02 AM »
sounds complicated
Logged

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3626
  • Darth Ladder
Re: brx baby
« Reply #12 on: April 21, 2017, 02:49:54 AM »
No more than it needs to be to do the job.  Do you need it done?

Besides, those are sucky.  Use the nice, professional ones.
« Last Edit: April 21, 2017, 02:52:34 AM by Controls Guy »
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

maciek

  • Sr. Member
  • ****
  • Posts: 95
Re: brx baby
« Reply #13 on: April 21, 2017, 10:24:41 PM »
i set up the smtp client device and followed a video i found on youtube set up the email instruction that c50 turns on i get a message couldn't open tcp connection with specified device in email at 0000161  (EMAIL at $Main@249)
any ideas or should i just give up
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: brx baby
« Reply #14 on: April 22, 2017, 10:40:09 AM »
Quote from: maciek on April 21, 2017, 10:24:41 PM
any ideas or should i just give up

Lots of ideas, and no, you shouldn't give up.

What is the PLC's IP config (address, netmask, and gateway) and what is the configuration of your router. The PLC can't access anything outside your local network unless this is correct.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1] 2
« previous next »