News:

  • September 22, 2026, 01:11:30 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Designer 1.0.2 locks up on PLC connect  (Read 15725 times)

ERokc

  • Hero Member
  • *****
  • Posts: 118
Designer 1.0.2 locks up on PLC connect
« on: August 15, 2013, 06:08:27 PM »
During the compare program "disc to PLC" I get this message. (attached)

I can open a previous project version and it's OK.  The change to my latest version is a CTRIO2 configuration change. There are some unused element references that have unassigned nicknames resulting from the config change.  I intend to remove that section of instruction later.

If support needs my two project files let me know.  I need you to keep then confidential.  I'm assuming the .dmd file is the whole project.

I rebooted the PC and no change.

Let me know.


Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Designer 1.0.2 locks up on PLC connect
« Reply #1 on: August 15, 2013, 08:10:24 PM »
PM me your contact info and I will email you. We would love to get the programs ASAP, since we are days from launching 1.1 and would like to fix this.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

ERokc

  • Hero Member
  • *****
  • Posts: 118
Re: Designer 1.0.2 locks up on PLC connect
« Reply #2 on: August 15, 2013, 08:28:52 PM »
I assume PM is personal mail?
I don't see how to attach a file so I need instructions on what to send and how to send it.

This may very well be a case of a novice doing something the software designer never anticipated.

This will only go to you wright, not the forum.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Designer 1.0.2 locks up on PLC connect
« Reply #3 on: August 15, 2013, 08:31:29 PM »
Quote from: ERokc on August 15, 2013, 08:28:52 PM
I assume PM is personal mail?
I don't see how to attach a file so I need instructions on what to send and how to send it.

This may very well be a case of a novice doing something the software designer never anticipated.

This will only go to you wright, not the forum.

PM = private message

You can send other users private messages through the forum.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3847
    • Host Engineering
Re: Designer 1.0.2 locks up on PLC connect
« Reply #4 on: August 16, 2013, 09:50:46 AM »
Quote from: ERokc on August 15, 2013, 06:08:27 PM
During the compare program "disc to PLC" I get this message.
It's a bug.  Thank you for finding and reporting it.  It's subtle, but huge.  Thankfully, we haven't shipped 1.1 out yet (you have no idea how close we were to shipping it).  The fix will be in 1.1.

Again, thanks!
Logged

ERokc

  • Hero Member
  • *****
  • Posts: 118
Re: Designer 1.0.2 locks up on PLC connect
« Reply #5 on: August 17, 2013, 01:39:59 PM »
And thank you for the work around of clearing the PLC memory and loading.  It gives me no grief at all. Back to debugging my ladder.
Logged

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3847
    • Host Engineering
Re: Designer 1.0.2 locks up on PLC connect
« Reply #6 on: August 17, 2013, 02:01:32 PM »
Quote from: ERokc on August 17, 2013, 01:39:59 PM
And thank you for the work around of clearing the PLC memory and loading.  It gives me no grief at all. Back to debugging my ladder.
Did you read my private forum message?  It has some detail that additional diagnostics in Designer 1.1 pointed out while researching the bug you helped us find.  It may be helpful, or you may have already addressed it.
Logged
Pages: [1]
« previous next »