Troubleshoot my code

[ChrisB]

here it is

[b_carlton]

What I get from the program:

On a non-special day you want screen 1 to be showing

On a special day you want that screen to be showing.

Do you do anything else with the screen?

Please call, it will be faster.

[ChrisB]

Still not quite right... Now it just says "Welcome to the .......'s" all the time. I am going to try and set up another 10 minute timer that starts when the door opens and latches. At the end of 10 minutes it will load screen 99 which i will go in and 'black' it out. So then when the door is opened/closed the timer will hopefully reset. See any problems with this logic Mr. Carlton? Thanks again                    Chris

[b_carlton]

Sorry to not have much for others on this thread. Chris called me and we went through some possibilities. It's a PLC <-> HMI command/response problem. I'll try to give a more helpful summary when we get things worked out. But Chris is under the gun. Tomorrow is a birthday. The big test.

[ChrisB]

Yes I must say... Sorry it took so long.... Mr Carlton is one awesome person. This genleman was the most patient with me out of several different "problem solvers". AD,AVG, and even a personal friend SI could not make this as Bernie calls it relatively simple project work. The only mistake Mr. Carlton made was giving me his home number. (J/K i would never abuse without pm'ing first). Again Mr Carlton thank you for taking time out of your day to help someone you dont even know. BTW you have a PM!            Chris

[ChrisB]

Mr Carlton it did work in a sense. It did bring up the B-day screen- very nice. If manually operate the hmi to a different screen and then open door it comes back to the b-day screen. Now i have another 12 days to work more bugs out till the next b-day. It never goes to the welcome screen however. Now i am thinking.... open door start 10 minute timer and LD welcome screen. At the end of 10 minutes open up that path with a c bit and let any other possible message screen be loaded ie B-day screen, alarm screen, etc. etc.       Chris

[b_carlton]

I'm glad I could help a little. Though I was using the phone call as an excuse to ignore my lawn. But, unfortunately, the call ended and I had to face my duty anyway. I hope you get your project to where you want it.