Multiple Cmores turning off and on a pump using Do-more

[Saturn_Europa1]

I was wondering if anyone has an elegant solution to turning off and on a pump from three different Cmore touch screens using the push button function. 

Can I set up the push button as a toggle writing to C0 on all three Cmores? My understanding is that when using a Pushbutton toggle and the PUMP_ON is pressed on HMI_1, HMI_2 and HMI_3 will show pressed as well. 

So when PUMP_ON is pressed on HMI_1 it will write C0=1 to the PLC.  This will be true until HMI_1, HMI_2 or HMI_3  writes a 0 to C0 by pressing the PUMP_ON push button again?

[franji1]

This is primarily a C-more question.  Host Engineering doesn't make C-more panels.

ADC's Community Website covers the whole range of products - BRX, C-more, etc.  I recommend you post your question there to get a good response.

https://community.automationdirect.com