News:

  • February 05, 2023, 07:58:46 PM

Login with username, password and session length

Author Topic: 8 Axis motion control with BRX?  (Read 420 times)

scottsutton

  • Full Member
  • ***
  • Posts: 33
8 Axis motion control with BRX?
« on: February 02, 2022, 06:11:31 AM »
I am just wanting to verify that a BX-DM1E-36ED23 along with a BX-HSIO4 can support 8 axis of line driver output for servo control? I have done several systems with the Do-More with 3 axis but I have a project that now requires 8.

Thanks,
Scott Sutton


ADC Product Engineer

  • Hero Member
  • *****
  • Posts: 270
Re: 8 Axis motion control with BRX?
« Reply #1 on: February 02, 2022, 08:58:14 AM »
Shouldn't be a problem.  You can stuff the entire rack full of HSIO if you want.

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3468
    • Host Engineering
Re: 8 Axis motion control with BRX?
« Reply #2 on: February 02, 2022, 09:14:31 AM »
FYI...

The closed loop capabilities are within a single HSIO module - NOT between HSIO modules.  For example, you can't use an AXFOLLOW with a Master on one HSIO card and the Slave on a different HSIO card.