DoMore comms with a POM ethernet option

[scottsutton]

I am using a BX-DM1E-18ED23 PLC for a new application. The C-More Touch screen will communication via the built-in Ethernet port. If I purchase the BX-P-ECOMLT POM Module and add it to the PLC can I use this port to connect my PC to and program the PLC AND the HMI? In other words, can I set the IP address scheme on the POM so that they exist on the same network? Does it support this type of comms?

Thanks,
Scott Sutton

[franji1]

It does not work as a router or switch.  Your PC can talk talk to the PLC, but not the C-more connected on the other Ethernet port.  You will need a switch.

[scottsutton]

Thank you.