News:

  • October 20, 2026, 09:31:07 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: DS 5 Function  (Read 7451 times)

Henryp

  • Hero Member
  • *****
  • Posts: 161
DS 5 Function
« on: April 29, 2020, 11:01:10 AM »
Hi,
So, if I want to know if stage 1 is active what element can I find or what do put in the data view window? Also, in Directsoft I can do a view\stage view. I can't seem to find a similar function in DMD.  Does it have one?
Thanks
Logged

RBPLC

  • Hero Member
  • *****
  • Posts: 586
Re: DS 5 Function
« Reply #1 on: April 29, 2020, 11:14:14 AM »
In DmD if you look in the "Project Browser" tab and expand the program that contains your stages and "All Status" is on, the active stages will be highlighted. Also, in the DataView window you can type (for example) $Main.S0 if you wanted to see if S0 (stage 0) was on in the $Main program.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6177
  • Yes Pinky, Do-more will control the world!
Re: DS 5 Function
« Reply #2 on: April 29, 2020, 11:17:19 AM »
Turn on status in the project browser, and expand the program block you want to view stages for. You can also add them to a Data View or Trend View $Main.S0, $Main.S1, etc.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3852
    • Host Engineering
Re: DS 5 Function
« Reply #3 on: April 29, 2020, 11:59:48 AM »
Also, Data View of just $Main will show you enabled stages in an intelligent list (vs. showing the state of all 128 stage bits).

If you give your Stage Bits good nicknames, and if you comment your SG Stage rungs, your Project Browser Stage level status is even MORE helpful.
Logged
Pages: [1]
« previous next »