News:

  • September 28, 2026, 12:54:17 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Input Contact placement on ladder rung?  (Read 8309 times)

jbullock

  • Newbie
  • *
  • Posts: 3
Input Contact placement on ladder rung?
« on: March 22, 2019, 11:25:20 AM »
I am using Do-More Designer and am trying to place a contact on the right side of the rung as shown in the attachment.  I'm unable to do this in Do-More. Is there a way to turn on or off rules that dictate only contacts be placed on left and coils be placed on the right sides of the rung?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Input Contact placement on ladder rung?
« Reply #1 on: March 22, 2019, 11:38:07 AM »
Sorry, no.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

jbullock

  • Newbie
  • *
  • Posts: 3
Re: Input Contact placement on ladder rung?
« Reply #2 on: March 22, 2019, 01:50:01 PM »
Thank you.
Logged

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: Input Contact placement on ladder rung?
« Reply #3 on: March 22, 2019, 02:23:00 PM »
Place the output O:2/3 in a branch ABOVE the contact/coil combination. You are probably getting the 'AND above a Join' error.
Logged
An output is a PLC's way of getting its inputs to change.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Input Contact placement on ladder rung?
« Reply #4 on: March 22, 2019, 02:25:45 PM »
Quote from: b_carlton on March 22, 2019, 02:23:00 PM
Place the output O:2/3 in a branch ABOVE the contact/coil combination. You are probably getting the 'AND above a Join' error.

Logically it's a legal rung. Our compiler will swap the order of the first and second coils though.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »