News:

  • May 05, 2024, 03:07:29 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Firmware UpDate  (Read 1616 times)

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
Firmware UpDate
« on: July 10, 2017, 12:14:37 PM »
Why when I use Netedit3 on my BRX it shows the click marks in the F & B Blocks? I take that means out of date. But when I use Do-More and check, it shows the Firmware and Boot is up to date.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5992
  • Yes Pinky, Do-more will control the world!
Re: Firmware UpDate
« Reply #1 on: July 10, 2017, 02:13:43 PM »
Sounds like you have an old copy of NetEdit. Do-more CPUs cannot be upgraded through NetEdit and it should just show a dash in those columns.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
Re: Firmware UpDate
« Reply #2 on: July 11, 2017, 11:50:33 AM »
Yes, sorry they were dashes. I did not know not to use Netedit on the Do-More. I just happened to open it up since in was in the list of the left pane. Maybe I should delete it from the list since it is not used to update the Do-More.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5992
  • Yes Pinky, Do-more will control the world!
Re: Firmware UpDate
« Reply #3 on: July 11, 2017, 11:52:39 AM »
Quote from: PLCGuy on July 11, 2017, 11:50:33 AM
Maybe I should delete it from the list since it is not used to update the Do-More.

It's still a viable tool for setting up the Ethernet port.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »