News:

  • June 11, 2026, 04:25:47 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: POM info  (Read 8573 times)

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
POM info
« on: June 21, 2017, 11:51:20 AM »
I am not seeing how to setup the Ethernet POM. The help file shows the ibox for the POM serial. But what about the ethernet? I went into Configuration and I only see the @intEthernet. On the @POM it shows settings that look like serial settings. How do I set up the POM ethernet?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: POM info
« Reply #1 on: June 21, 2017, 12:03:05 PM »
Either with NetEdit, or through the POM config page accessed from the SysConfig's CPU page or by clicking on the picture of the POM in the Dashboard.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
Re: POM info
« Reply #2 on: June 21, 2017, 12:46:31 PM »
darn it was right in front of me. I clicked on the POM in Sys Config, and it shows for both the serial and ethernet. So simple, I think that is why I did not see it.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: POM info
« Reply #3 on: June 21, 2017, 12:52:14 PM »
Since the POM can be hot swapped, you are configuring for all possible POMs.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
Re: POM info
« Reply #4 on: June 21, 2017, 06:15:24 PM »
stop making things so easy, your going to get a good reputation.
Logged
Pages: [1]
« previous next »