News:

  • October 14, 2025, 05:29:19 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: C-More Micro  (Read 2704 times)

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
C-More Micro
« on: January 04, 2017, 07:17:11 AM »
Need help setting up the serial port to communicate with a 3" C-More Micro. I tried all settings, but no luck.
Using 38400/ 1 stoop / none parity.
Can not find anything in the help file.
Logged

ADC Product Engineer

  • Hero Member
  • *****
  • Posts: 270
Re: C-More Micro
« Reply #1 on: January 04, 2017, 08:27:57 AM »
The port on the Do-more needs to be set to "Programming".   The C-more should be using the Do-more Serial driver.
Logged

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
Re: C-More Micro
« Reply #2 on: January 04, 2017, 10:16:16 AM »
I feel so stupid, the cpu went into program mode when I changed the configuration. I did not know it. All is good. I did not think it should have been that hard to do.

thank you for replying.
Logged
Pages: [1]
« previous next »