News:

  • September 03, 2026, 01:41:25 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Comments and Ladder  (Read 16576 times)

jneill

  • Jr. Member
  • **
  • Posts: 19
Comments and Ladder
« on: May 20, 2008, 06:12:54 PM »
Is there a way to save the comments when loading into the plc. I have some work to do on some plc's that have been programmed by someone else and there isn't any comments when loading from the plc! This makes going behind someone else very hard! ???
Logged

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: Comments and Ladder
« Reply #1 on: May 20, 2008, 06:20:01 PM »
The comments do not store into the AutomationDirect PLCs.
Logged
An output is a PLC's way of getting its inputs to change.

jneill

  • Jr. Member
  • **
  • Posts: 19
Re: Comments and Ladder
« Reply #2 on: May 21, 2008, 06:35:00 AM »
But it would be really nice to at least have the option to do so.
Logged

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3843
    • Host Engineering
Re: Comments and Ladder
« Reply #3 on: May 21, 2008, 09:50:45 AM »
This is one of those features we're working on...   8)
Logged

Narf3684

  • Newbie
  • *
  • Posts: 4
Re: Comments and Ladder
« Reply #4 on: June 17, 2008, 12:49:51 AM »
That is good. I thought you could save them. Well you could always print out the ladder with the coments, or just write them down, but that isn't going to help you.
Logged
Pages: [1]
« previous next »