News:

  • June 07, 2026, 10:03:32 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: AdvancedHMI  (Read 14802 times)

Ingeniero

  • Full Member
  • ***
  • Posts: 45
AdvancedHMI
« on: April 21, 2016, 07:42:21 PM »
Has anybody ever used AdvancedHMI with a Do-more controller?

Is there a communications driver?

Any comments about these two running together?

Was AdvancedHMI a decent HMI? Could you do trending and keep data records?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: AdvancedHMI
« Reply #1 on: April 21, 2016, 07:49:13 PM »
Do-more supports Modbus/RTU and Modbus/TCP. I'm certain AdvancedHMI supports those. I would be very surprised if they supported our native protocol though.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Ingeniero

  • Full Member
  • ***
  • Posts: 45
Re: AdvancedHMI
« Reply #2 on: April 21, 2016, 09:02:25 PM »
So I would have to feed everything through modbus. No comm driver where I can just add tag names and go?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: AdvancedHMI
« Reply #3 on: April 21, 2016, 09:05:59 PM »
I don't know for certain whether they have a Do-more driver, but if they don't, then yes. There is nothing to prevent you from writing your code using variables in Modbus memory though.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Ingeniero

  • Full Member
  • ***
  • Posts: 45
Re: AdvancedHMI
« Reply #4 on: April 21, 2016, 09:36:12 PM »
What about OPC? Can Do-more support OPC comms?

http://www.advancedhmi.com/index.php?main_page=page&id=5
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: AdvancedHMI
« Reply #5 on: April 21, 2016, 10:45:49 PM »
We are planning to add OPC DA support in the future, but it is not yet supported.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Ingeniero

  • Full Member
  • ***
  • Posts: 45
Re: AdvancedHMI
« Reply #6 on: April 21, 2016, 11:15:47 PM »
BINGO

there is a youtube with someone connecting a do-more simulator to the free AdvncedHMI software. Looks easy. I will update you in a few days. All the software to do this project is free.

God bless youtube.

https://www.youtube.com/watch?v=1rWI-A-nZdo
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: AdvancedHMI
« Reply #7 on: April 21, 2016, 11:18:17 PM »
Appears to be using Modbus/TCP. Easy.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Ingeniero

  • Full Member
  • ***
  • Posts: 45
Re: AdvancedHMI
« Reply #8 on: April 21, 2016, 11:22:22 PM »
Logged
Pages: [1]
« previous next »