News:

  • February 05, 2023, 06:17:08 PM

Login with username, password and session length

Author Topic: Is it possible?  (Read 3664 times)

Henryp

  • Hero Member
  • *****
  • Posts: 161
Is it possible?
« on: January 21, 2016, 01:48:23 PM »
Is it possible for the firmware in an Ecom 100 to be modified so that the Modbus listen port can be set to something beside 502?

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5793
  • Yes Pinky, Do-more will control the world!
Re: Is it possible?
« Reply #1 on: January 21, 2016, 02:31:20 PM »
Well, technically, it already can. There is a configuration data type that, if set, will allow it to listen on up to 10 ports. As of this moment, there isn't a publicly available way to set that data type. We would have to add it to NetEdit or the ECOM100s web page.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Henryp

  • Hero Member
  • *****
  • Posts: 161
Re: Is it possible?
« Reply #2 on: January 25, 2016, 12:20:59 PM »
I would use this ability if it was added to the ECOM100. I have done this will all my Do-More PLCs.

Esazamani

  • Newbie
  • *
  • Posts: 2
Re: Is it possible?
« Reply #3 on: November 13, 2017, 04:40:28 AM »
I like this way of thinking is very high.