News:

  • June 10, 2026, 04:27:08 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: DirectSoft 6 - Modbus TCP Help  (Read 22483 times)

ortiz.edward

  • Newbie
  • *
  • Posts: 5
DirectSoft 6 - Modbus TCP Help
« on: July 28, 2015, 03:19:59 PM »
Hello! I am new to the Automation Direct PLCs. I have a customer that requires we use a Direct Logic 205 PLC with a DL 250-1 CPU and a H2-ECOM100 module. I need to create a program that will act as a pass through. I have received a Modbus map from the customer that has about 85 register numbers. I figured out that I first need to configure the peer to peer using NetEdit 3 then use the ECOM100 CONFIG ibox in my program. Next I started using the ECRX iboxes. Can I get some more detailed information on the correct approach. All the information I have gathered has been just doing online research. I would really appreciate an in depth help on this. Thank you. If you need more information please let me know. 
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: DirectSoft 6 - Modbus TCP Help
« Reply #1 on: July 28, 2015, 04:44:44 PM »
It sounds like this isn't an option, but the DL205 using an H2-DM1E will be far easier, faster, and cheaper.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

ortiz.edward

  • Newbie
  • *
  • Posts: 5
Re: DirectSoft 6 - Modbus TCP Help
« Reply #2 on: July 28, 2015, 05:12:04 PM »
Why would this not be an option?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: DirectSoft 6 - Modbus TCP Help
« Reply #3 on: July 28, 2015, 05:15:07 PM »
Quote from: ortiz.edward on July 28, 2015, 05:12:04 PM
Why would this not be an option?

You stated that the customer required you to use a D2-250-1 and an H2-ECOM100. If that is not the case, I would use the H2-DM1E and enjoy faster, easier, and cheaper.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

ortiz.edward

  • Newbie
  • *
  • Posts: 5
Re: DirectSoft 6 - Modbus TCP Help
« Reply #4 on: July 28, 2015, 05:19:16 PM »
Im sorry I read your comment wrong. But yes we were provided with the CPU and the module so we don't have another option. Is there any help you could provide me with to set up the programming with the materials that I have?
Logged

ADC Product Engineer

  • Hero Member
  • *****
  • Posts: 270
Re: DirectSoft 6 - Modbus TCP Help
« Reply #5 on: July 28, 2015, 09:35:36 PM »
AutomationDirect has free technical support Monday through Friday 9 am to 6 pm Eastern Time.  They should be able to give you great guidance on what you need to do.  1-800-633-0405
Logged

MAEdwards

  • Sr. Member
  • ****
  • Posts: 56
Re: DirectSoft 6 - Modbus TCP Help
« Reply #6 on: July 29, 2015, 09:46:00 AM »
Quote from: ortiz.edward on July 28, 2015, 03:19:59 PM
Hello! I am new to the Automation Direct PLCs. I have a customer that requires we use a Direct Logic 205 PLC with a DL 250-1 CPU and a H2-ECOM100 module. I need to create a program that will act as a pass through. I have received a Modbus map from the customer that has about 85 register numbers. I figured out that I first need to configure the peer to peer using NetEdit 3 then use the ECOM100 CONFIG ibox in my program. Next I started using the ECRX iboxes. Can I get some more detailed information on the correct approach. All the information I have gathered has been just doing online research. I would really appreciate an in depth help on this. Thank you. If you need more information please let me know. 

Ortiz.Edward,
Have you received any guidance on this yet?  If not, let me know.  Maybe I can help out.  I have a project right now in which I am using several DL260's and H2-ECOMM100's, utilizing the Peer to Peer feature.
Logged

ortiz.edward

  • Newbie
  • *
  • Posts: 5
Re: DirectSoft 6 - Modbus TCP Help
« Reply #7 on: July 29, 2015, 10:30:47 AM »
MAEdwards, No I have not received proper guidance on this yet. Could you please help me. Thank you!
Logged
Pages: [1]
« previous next »