News:

  • June 28, 2026, 06:19:30 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Do-more Ethernet  (Read 9178 times)

azeotrope

  • Jr. Member
  • **
  • Posts: 10
Do-more Ethernet
« on: October 16, 2014, 05:01:33 PM »
Hello all,

I have several Do-More H2 DM1E plc running on and ethernet loop with some c-more's and some VFD's Set up is pretty easy for items from AD.
I want to install a WEBRELAY into the mix. http://www.controlbyweb.com/webrelay/

I can see this on the network, can ping it etc but I can't for the life of me figure out how to get it to communicate with the PLC

Any ideas on how to go?

Thanks.
Tom J.
Logged

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: Do-more Ethernet
« Reply #1 on: October 16, 2014, 05:05:53 PM »
It looks like the Modbus/TCP Slave capability would be the key to use as a remote input/output point. Section 3.4 in its manual has the details. Use MRX and MWX commands in the Do-more to communicate.
« Last Edit: October 16, 2014, 05:10:25 PM by b_carlton »
Logged
An output is a PLC's way of getting its inputs to change.

azeotrope

  • Jr. Member
  • **
  • Posts: 10
Re: Do-more Ethernet
« Reply #2 on: October 16, 2014, 08:33:18 PM »
Worked like a charm, Thanks much
Logged

LWgreys

  • Hero Member
  • *****
  • Posts: 117
Re: Do-more Ethernet
« Reply #3 on: October 17, 2014, 12:01:42 AM »
Oh, this is a neat little device!  8)
Logged
Pages: [1]
« previous next »