Discrete I/O Module Mapping
The default configuration for a Do-more
controller is to automatically map the I/O points for all Discrete I/O
Modules, beginning in the slot adjacent to the controller, and proceeding
from left to right across the base, allocating discrete input and output
memory as each module requires.
Discrete Inputs are mapped into X memory, starting at X0. Each location
in X memory contains 1 bit, which can be ON or OFF.
Discrete Outputs are mapped into Y memory, starting at Y0. Each location
in Y memory contains 1 bit, which can be ON or OFF.
Discrete Inputs and Outputs are allocated on Byte (8-bit) boundaries.
See the Additional Notes column for I/O mapping details for modules that
have I/O counts that are not on Byte boundaries.
Note:
the default mapping for any of the I/O modules can be changed through
the I/O
Mappings page in the System Configuration utility.
Supported Discrete Input Modules |
|
Part Number |
Description |
Module ID |
Input Points
Consumed |
Additional Notes |
|
D2-08ND3 |
DC Input |
254 (0xFE) |
8 |
|
|
D2-16ND3-2 |
DC Input |
191 (0xBF) |
16 |
|
|
D2-32ND3 |
DC Input |
126 (0x7E) |
32 |
|
|
D2-32ND3-2 |
DC Input |
126 (0x7E) |
32 |
|
|
D2-08NA-1 |
AC Input |
254 (0xFE) |
8 |
|
|
D2-08NA-2 |
AC Input |
254 (0xFE) |
8 |
|
|
D2-16NA |
AC Input |
191 (0xBF) |
16 |
|
|
F2-08SIM |
Input Simulator |
254 (0xFE) |
8 |
|
Supported Discrete Output Modules |
|
Part Number |
Description |
Module ID |
Output Points
Consumed |
Additional Notes |
|
D4-04TD1 |
DC Output |
223 (0xDF) |
8 |
Yn+0 - Yn+3 used, Yn+4 - Yn+7 unused |
|
D2-08TD1 |
DC Output |
253 (0xFD) |
8 |
|
|
D2-08TD2 |
DC Output |
253 (0xFD) |
8 |
|
|
D2-16TD1-2 |
DC Output |
127 (0x7F) |
16 |
|
|
D2-16TD2-2 |
DC Output |
127 (0x7F) |
16 |
|
|
D2-32TD1 |
DC Output |
249 (0xF9) |
32 |
|
|
D2-32TD2 |
DC Output |
249 (0xF9) |
32 |
|
|
D2-08TA |
AC Output |
253 (0xFD) |
8 |
|
|
F2-08TA |
AC Output |
253 (0xFD) |
8 |
|
|
D2-12TA |
AC Output |
127 (0x7F) |
16 |
Yn+0 - Yn+5 used, Yn+6 & Yn+7 unused
Yn+8 - Yn+13 used, Yn+14 and Yn+15 unused |
|
D2-04TRS |
Relay Output (Isolated) |
253 (0xDF) |
8 |
Yn+0 - Yn+3 used, Yn+4 - Yn+7 unused |
|
D2-08TR |
Relay Output |
253 (0xFD) |
8 |
|
|
F2-08TR(S) |
Relay Output (Isolated) |
253 (0xFD) |
8 |
|
|
D2-12TR |
Relay Output |
127 (0x7F) |
16 |
Yn+0 - Yn+5 used, Yn+6 & Yn+7 unused
Yn+8 - Yn+13 used, Yn+14 and Yn+15 unused |
Supported Combination Discrete Input/Output
Modules |
|
Part Number |
Description |
Module ID |
Input / Output
Points Consumed |
Additional Notes |
|
D2-08CDR |
|
247 (0xF7) |
8 / 8 |
Xn+0 - Xn+3 used, Xn+4 - Xn+7 unused
Yn+0 - Yn+3 used, Yn+4 - Yn+7 unused |
|
F2-16TD1P |
DC Output (w/ Fault Protection) |
231 (0xE7) |
16 / 16 |
|
|
F2-16TD2P |
DC Output (w/ Fault Protection) |
231 (0xE7) |
16 / 16 |
|
|