News:

  • October 01, 2025, 07:15:50 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: add a base  (Read 2493 times)

PLCGuy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 677
add a base
« on: August 24, 2018, 05:56:39 AM »
Is there a preferred method of adding another base to a D2-DM1E system? I need to add more I/O cards and would like to add a base since it is right next to the existing base already installed. I read somewhere the D2-Cm and D2 EM no longer work with the Do-More.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6123
  • Yes Pinky, Do-more will control the world!
Re: add a base
« Reply #1 on: August 24, 2018, 07:52:43 AM »
There were limitations with the EM/CM approach that we didn't want to deal with.

Use the Ethernet I/O Master and an EBC or a DMIO. It doesn't have to be 205, you could use BRX with it.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Henryp

  • Hero Member
  • *****
  • Posts: 161
Re: add a base
« Reply #2 on: August 24, 2018, 05:48:33 PM »
A 16 slot base would be nice.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6123
  • Yes Pinky, Do-more will control the world!
Re: add a base
« Reply #3 on: August 24, 2018, 06:33:57 PM »
Quote from: Henryp on August 24, 2018, 05:48:33 PM
A 16 slot base would be nice.

16? That's big. Would 11 solve most issues?
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Henryp

  • Hero Member
  • *****
  • Posts: 161
Re: add a base
« Reply #4 on: August 27, 2018, 07:17:15 PM »
11 slots would work, twice doing a 450 to Do More upgrade I needed one more slot.

Logged
Pages: [1]
« previous next »