News:

  • September 26, 2026, 05:26:32 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Proper Way to Copy Program to Another Controller  (Read 6343 times)

RBPLC

  • Hero Member
  • *****
  • Posts: 586
Proper Way to Copy Program to Another Controller
« on: October 02, 2020, 10:54:27 AM »
I have two same controllers configured exactly the same with the exception of ip addresses being different between the controllers. I've developed a program on one and want to copy it to the other. How do I do this?
Logged

RBPLC

  • Hero Member
  • *****
  • Posts: 586
Re: Proper Way to Copy Program to Another Controller
« Reply #1 on: October 02, 2020, 11:08:27 AM »
DMLoader. Got it. Usually helps to RTM.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Proper Way to Copy Program to Another Controller
« Reply #2 on: October 02, 2020, 12:49:57 PM »
DMLoader is one way. DmD is fine too. Just open the disk project, connect to the PLC, choose disk when prompted, then write to the PLC. You can also use an SDCard to clone systems.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »