News:

  • September 29, 2026, 01:04:17 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Filtering available in BX analog module config  (Read 10837 times)

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3626
  • Darth Ladder
Filtering available in BX analog module config
« on: September 16, 2020, 12:25:38 PM »
I noticed there is a filter option in the BX-04AD-3 but not the BX-04AD-2B.    I assume this means the 3 does filtering but not the 2B?

If so, that puts the feature comparison for the  3 vs. 2B at like 5-0!   8)
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Filtering available in BX analog module config
« Reply #1 on: September 16, 2020, 01:33:14 PM »
Quote from: Controls Guy on September 16, 2020, 12:25:38 PM
I noticed there is a filter option in the BX-04AD-3 but not the BX-04AD-2B.    I assume this means the 3 does filtering but not the 2B?

If so, that puts the feature comparison for the  3 vs. 2B at like 5-0!   8)

That is correct. Filtering is a new feature in the -3s and UTs.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3626
  • Darth Ladder
Re: Filtering available in BX analog module config
« Reply #2 on: September 16, 2020, 01:39:44 PM »
Very cool.    I used a FILTER box the first time this feature deployed (with a 2B), and all other current copies use the -3 and future ones can as well.  It will be nice to get rid of the box.
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Filtering available in BX analog module config
« Reply #3 on: September 16, 2020, 01:45:54 PM »
Quote from: Controls Guy on September 16, 2020, 01:39:44 PM
Very cool.    I used a FILTER box the first time this feature deployed (with a 2B), and all other current copies use the -3 and future ones can as well.  It will be nice to get rid of the box.

Given enough channels, I suppose FILTER starts to impact scan time. The micro in the module was bored most of the time, so...
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3626
  • Darth Ladder
Re: Filtering available in BX analog module config
« Reply #4 on: September 16, 2020, 02:01:13 PM »
Quote from: BobO on September 16, 2020, 01:45:54 PM
Given enough channels, I suppose FILTER starts to impact scan time. The micro in the module was bored most of the time, so...

 ;D  Plus it's nice to clean up the ladder so you can focus on the actual logic without having to look at overhead stuff.
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

jrayb

  • Full Member
  • ***
  • Posts: 46
Re: Filtering available in BX analog module config
« Reply #5 on: September 17, 2020, 10:38:28 PM »
The only downside to using the filter option is that you can't do it on the fly in run mode. The PLC has to switch to program mode if you change the filter time option.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6176
  • Yes Pinky, Do-more will control the world!
Re: Filtering available in BX analog module config
« Reply #6 on: September 17, 2020, 11:00:57 PM »
Quote from: jrayb on September 17, 2020, 10:38:28 PM
The only downside to using the filter option is that you can't do it on the fly in run mode. The PLC has to switch to program mode if you change the filter time option.

I'm sure this could be addressed. Do you need to change it often, or is this just an initial setup tuning issue?
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Bolt

  • Hero Member
  • *****
  • Posts: 598
Re: Filtering available in BX analog module config
« Reply #7 on: September 18, 2020, 06:36:24 PM »
Quote from: BobO on September 17, 2020, 11:00:57 PM
Quote from: jrayb on September 17, 2020, 10:38:28 PM
The only downside to using the filter option is that you can't do it on the fly in run mode. The PLC has to switch to program mode if you change the filter time option.

I'm sure this could be addressed. Do you need to change it often, or is this just an initial setup tuning issue?
Initial setup/tuning/troubleshooting scenarios.  Or changing a sensor out with another one and needing to dial in the values.
Logged

jrayb

  • Full Member
  • ***
  • Posts: 46
Re: Filtering available in BX analog module config
« Reply #8 on: September 18, 2020, 10:27:55 PM »
What Bolt said. Basically during intiial setup or changing out sensors then needing to adjust the filter time to smooth everything out.
Logged
Pages: [1]
« previous next »