News:

  • November 06, 2025, 03:12:05 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Force Bit Status  (Read 1656 times)

eman5oh

  • Sr. Member
  • ****
  • Posts: 59
Force Bit Status
« on: March 13, 2019, 04:21:47 PM »
I dug through the help file but I could not find a status bit that would tell if a force was in use on the PLC, is there one?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6130
  • Yes Pinky, Do-more will control the world!
Re: Force Bit Status
« Reply #1 on: March 13, 2019, 04:58:12 PM »
Only available through comms, not published to ST/DST.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

eman5oh

  • Sr. Member
  • ****
  • Posts: 59
Re: Force Bit Status
« Reply #2 on: March 14, 2019, 12:16:27 PM »
Can CMORE get that info?  Would be a nice feature to have a bit set when any force is active on the PLC  ;)
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6130
  • Yes Pinky, Do-more will control the world!
Re: Force Bit Status
« Reply #3 on: March 14, 2019, 12:18:05 PM »
It's available to them, but I doubt they read it. It isn't hard to add an ST bit though.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »