News:

  • August 26, 2026, 03:25:41 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: DO-More with Maple Systems HMI  (Read 7525 times)

timk

  • Jr. Member
  • **
  • Posts: 15
DO-More with Maple Systems HMI
« on: August 17, 2018, 02:21:53 PM »
Anyone had experiences good or bad with using a Maple Systems HMI5043 with the Do-More PLC
There website indicates that it must be connected using the Ethernet Port on the PLC, If so the PLC could not be on a network.

Thanks
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6172
  • Yes Pinky, Do-more will control the world!
Re: DO-More with Maple Systems HMI
« Reply #1 on: August 17, 2018, 02:35:53 PM »
The PLC can do both at the same time. It isn't ideal, but it isn't a killer.

If the PLC is a BRX, you can add a 2nd Ethernet port with an ECOMLT POM.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

ATU

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 2126
  • YKPAIHA
    • ATU, Inc.
Re: DO-More with Maple Systems HMI
« Reply #2 on: August 17, 2018, 02:53:27 PM »
A lot of their displays are made by Weintek. Check for a native DoMore protocol if you want to get greater access to memory in the Domore. Otherwise, I am sure they have Modbus or the Koyo/AD protocols. I think the programing package is free. I would download it first and try it out before committing.
Logged
Pages: [1]
« previous next »