News:

  • August 31, 2026, 03:03:00 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Doing more  (Read 9665 times)

Garyhlucas

  • Hero Member
  • *****
  • Posts: 421
Doing more
« on: May 10, 2016, 08:19:03 PM »
Just sold three new systems with DoMore PLCs. Our MiniMBR waste treatment plant is getting tons of interest and we expect orders for 3 more shortly. This is an entire advanced Ultrafiltration membrane waste water treatment plant on a single skid. It produces nearly drinking water from raw sewage. This one is sized for parks, schools, office buildings, shopping centers, convenience stores that don't have city swers available.

Glad we hitched the cart to Domore!
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6174
  • Yes Pinky, Do-more will control the world!
Re: Doing more
« Reply #1 on: May 10, 2016, 10:12:24 PM »
Glad you did too! I'm sure the folks at ADC would love an app story. :hint:
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Garyhlucas

  • Hero Member
  • *****
  • Posts: 421
Re: Doing more
« Reply #2 on: May 14, 2016, 04:02:10 PM »
Might make a good story for them. The PLC is DoMore and everything electrical, enclosures, main switch, breakers, transformer, power supplies, din rail, terminals, relays, sockets, saturable reactors, cooling fan, exhaust grill, thermostat, control cables, cable ends, pressure and temperature transmitters, C-more HMI, E-stop button, wire, brass air fittings, and push-in tube connectors, gear reducer, C-face motor, shaft encoder, are all from Automation Direct! EXCEPT the VFD drives which are Hitachi, because we run on single phase power and AD drives could't use single phase above 3 hp. Designed in 100% in SolidWorks using lots of 3d models downloaded from AD too. Not to mention I've been using AD PLCs since 1994.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6174
  • Yes Pinky, Do-more will control the world!
Re: Doing more
« Reply #3 on: May 14, 2016, 06:24:59 PM »
Quote from: Garyhlucas on May 14, 2016, 04:02:10 PM
Might make a good story for them. The PLC is DoMore and everything electrical, enclosures, main switch, breakers, transformer, power supplies, din rail, terminals, relays, sockets, saturable reactors, cooling fan, exhaust grill, thermostat, control cables, cable ends, pressure and temperature transmitters, C-more HMI, E-stop button, wire, brass air fittings, and push-in tube connectors, gear reducer, C-face motor, shaft encoder, are all from Automation Direct! EXCEPT the VFD drives which are Hitachi, because we run on single phase power and AD drives could't use single phase above 3 hp. Designed in 100% in SolidWorks using lots of 3d models downloaded from AD too. Not to mention I've been using AD PLCs since 1994.

If you are willing to work with them on it, I'm sure they would publish in one of several outlets they use for such things.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »