News:

  • June 10, 2026, 01:05:15 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Ladder View Difference DirectSOFT 5 to DirectSOFT 6....meaning..?  (Read 27602 times)

samuelgmaurer

  • Newbie
  • *
  • Posts: 8
Ladder View Difference DirectSOFT 5 to DirectSOFT 6....meaning..?
« on: August 25, 2015, 11:30:40 AM »
The ladder diagram for a TMR has changed from DirectSOFT 5 to DirectSOFT 6, can you tell me the meaning of the E/R on the input ladder to the TMR box?  See attached screen shots.  And yes, I am a newbie...
Logged
“All truths are easy to understand once They are discovered;
the point is to discover them” - Galileo

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: Ladder View Difference DirectSOFT 5 to DirectSOFT 6....meaning..?
« Reply #1 on: August 25, 2015, 11:46:21 AM »
The tabs were added so you know what each leg does. Just means Enable/Reset.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3607
  • Darth Ladder
Re: Ladder View Difference DirectSOFT 5 to DirectSOFT 6....meaning..?
« Reply #2 on: August 25, 2015, 02:43:21 PM »
If there is not an anti-tiedown function elsewhere in your two-hand input, you might want to add one to enhance safety.  (Like say a timer on each start button, which must not have expired by the time the other button is pressed.)
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.
Pages: [1]
« previous next »