News:

  • May 01, 2026, 11:23:12 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Restore Default Settings without Software  (Read 18449 times)

AndyTBWR

  • Newbie
  • *
  • Posts: 6
Restore Default Settings without Software
« on: June 10, 2011, 01:45:23 PM »
Is there a method for restoring a H2-ECOM100 module to the factory settings withoug using NetEdit3?  NetEdit3 crashes every time I click the [IPX] or [TCP/IP] buttons.
Logged

AndyTBWR

  • Newbie
  • *
  • Posts: 6
Re: Restore Default Settings without Software
« Reply #1 on: June 10, 2011, 02:32:32 PM »
Alternately, can the IP address in the H2-ECOM100 module be changed throught the PLC CPU's (DL260) Port 1 connection?
Logged

AndyTBWR

  • Newbie
  • *
  • Posts: 6
Re: Restore Default Settings without Software
« Reply #2 on: June 14, 2011, 09:49:32 AM »
Interesting. . . Lots of views but no responses, other than me talking to myself:

Well, Self, it turns out the problem you were having was with NetEdit3 and its incompatibility with Windows XP 64-Bit.  Once you installed NetEdit3 on your Windows XP 32-Bit Virtual Machine, you was able to get the software to run properly and see the H2-ECOM100 module you was having trouble with.  You were then able to configure the module with the desired IP address and all seems to be right with the system once again.  Problem solved. . .

Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6154
  • Yes Pinky, Do-more will control the world!
Re: Restore Default Settings without Software
« Reply #3 on: June 14, 2011, 11:21:24 AM »
Quote from: AndyTBWR on June 14, 2011, 09:49:32 AM
Interesting. . . Lots of views but no responses, other than me talking to myself:

No excuse Andy, but perhaps this will help a bit...

We are eyeballs deep in a project we have bet our futures on...people are in and out due to vacations...and we have had a ton of forum distractions due to spammers getting around the security.

We just kicked out Netedit 3.8. I am pretty sure it runs on Win7 64 bit, but have no clue about XP 64 bit. Heck, I didn't even know there was one.

I have been away from the office since last Wednesday, but I promise to flog my minions upon my return.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

AndyTBWR

  • Newbie
  • *
  • Posts: 6
Re: Restore Default Settings without Software
« Reply #4 on: June 14, 2011, 12:08:55 PM »
I understand your situation and thank you for the response.

I have version 3.8 installed on my 64-bit XP system and it crashes.  It works just fine on the 32-bit virtual machine.

I hope the project is a huge success!
Logged

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3607
  • Darth Ladder
Re: Restore Default Settings without Software
« Reply #5 on: June 14, 2011, 12:16:35 PM »
Quote from: BobO on June 14, 2011, 11:21:24 AM
I have been away from the office since last Wednesday, but I promise to flog my minions upon my return.

Yeah, but that doesn't count -- you were gonna do that anyway!  :D
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6154
  • Yes Pinky, Do-more will control the world!
Re: Restore Default Settings without Software
« Reply #6 on: June 14, 2011, 12:44:33 PM »
Aahh...there is nothing quite like a good minion flogging to get back in the swing of things! I guess I will have to do so twice! :D
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

AndyTBWR

  • Newbie
  • *
  • Posts: 6
Re: Restore Default Settings without Software
« Reply #7 on: June 14, 2011, 12:48:53 PM »
If only I had my own minions. . .
Logged

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3607
  • Darth Ladder
Re: Restore Default Settings without Software
« Reply #8 on: June 14, 2011, 01:07:20 PM »
Quote from: AndyTBWR on June 14, 2011, 12:48:53 PM
If only I had my own minions. . .

Hie thee to Rent-A-Minion, man!

(Minions-R-Us can be good too)
« Last Edit: June 14, 2011, 05:49:32 PM by Controls Guy »
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

Greg

  • HostTech
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 702
  • Hmmm...
    • Host Engineering, Inc.
Re: Restore Default Settings without Software
« Reply #9 on: June 15, 2011, 11:18:04 AM »
Ooops... sorry AndyTBWR. I did not see this post. I did, however, send you an e-mail response from your post to support@hosteng.com but got no response...  :P

However, having been summarily and properly flogged, I will be more vigil.  ;D
Logged
There are two types of people in the world; those that can extrapolate from incomplete data sets.
Pages: [1]
« previous next »