News:

  • December 05, 2024, 05:17:56 AM

Login with username, password and session length

Author Topic: Analog Input  (Read 15573 times)

PStiles

  • Full Member
  • ***
  • Posts: 31
Re: Analog Input
« Reply #30 on: October 19, 2010, 05:07:15 PM »
I modified the programming to just read the inputs. I have sensors hooked to the first 4 inputs. Memory location V3000 that is associated to input 1 is showing 326. Memory location 3001, which is associated with input 2, is showing 2374. Both inputs increase when you hold the sensor in your hand. Not sure why input 2 (Memory location is showing this, it should be very close to input 1.

I measure the voltage on both sensors and they are .3 millivolts off.