News:

  • June 08, 2026, 08:02:12 AM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: PULSE COUNT IN RUN TO POSITION MODE  (Read 22063 times)

gjones

  • Newbie
  • *
  • Posts: 6
PULSE COUNT IN RUN TO POSITION MODE
« on: October 03, 2009, 10:07:39 AM »
How can I find the actual output pulse count to a stepping motor when using Run to Position mode where position is established by quad counter from a linear encoder.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6158
  • Yes Pinky, Do-more will control the world!
Re: PULSE COUNT IN RUN TO POSITION MODE
« Reply #1 on: October 03, 2009, 11:27:56 AM »
Hmmm...

Run to position is actually a sub mode of velocity, so the actual pulse count isn't maintained. I'd say the best way to do it would be to feed the pulses into a spare counting channel, if you have one. I know that isn't a great answer, but that may be the best we can do.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »