News:

  • April 30, 2026, 12:30:58 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Firmware update via USB  (Read 44896 times)

Garyhlucas

  • Hero Member
  • *****
  • Posts: 421
Firmware update via USB
« on: December 24, 2024, 09:41:37 AM »
I need to upgrade firmware on an ethernet Do-More in a DL205 rack that has no internet connection.  It is for a CNC machine that isn't running any antivirus software because of conflicts with the controller.  Any way to get the latest firmware onto a USB stick?
Logged

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3806
    • Host Engineering
Re: Firmware update via USB
« Reply #1 on: December 25, 2024, 11:14:05 AM »
If someone is going to be physically there with a USB stick, instead they can just use a laptop with a USB B cable and just connect directly to the PLC using Designer and upgrade the firmware.  Just make sure they have the latest firmware on their laptop beforehand if there is NO Internet connection ANYWHERE.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6154
  • Yes Pinky, Do-more will control the world!
Re: Firmware update via USB
« Reply #2 on: December 25, 2024, 02:43:57 PM »
DMLoader can do it as well.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO
Pages: [1]
« previous next »