News:

  • July 16, 2024, 03:18:38 PM

Login with username, password and session length

Author Topic: Excellent WinPLC (Think&Do) replacement  (Read 190 times)

Greg

  • HostTech
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 687
  • Hmmm...
    • Host Engineering, Inc.
Excellent WinPLC (Think&Do) replacement
« on: July 02, 2024, 09:30:19 AM »
The WinPLC has been discontinued since 2015. Think&Do Software was purchased by Phoenix Contact but also obsoleted. There is no good forward path other than a total rewrite on another PLC platform. There is a System Integrator, KCC Software (ref. Scott Martin), who converts a WinPLC project to a Do-more H2-DM1E PLC. If you do not have the software or resources to convert it yourself, KCC Software can help.

This is the easiest, fastest, cheapest option (which will not even require a change of a single wire) and is merely a rewrite of the project in Do-more code. The H2-DM1E CPU will plug directly into the CPU slot of the WinPLC base and work with the same hardware.

Please send an email to support at hosteng dot com for referral to KCC Software.
There are two types of people in the world; those that can extrapolate from incomplete data sets.


There are no comments for this topic. Do you want to be the first?