• April 16, 2024, 02:58:52 AM

Login with username, password and session length

Author Topic: Example of machine upgrade  (Read 1896 times)

  • Jr. Member
  • **
  • Posts: 12
  • Servo
Example of machine upgrade
« on: December 01, 2021, 12:18:35 PM »

Example of machine upgrade of model:

currently in production with Do-more

video of machine running

cool features:

Do-more program can handle:

- under and over pressurized air balancing cylinder compensation from operator error that may cause an over or under shoot in paper length

- broken main bearings on travel knife

- erratic main encoder wheel

- oversized motor on infeed conveyor

- under sized motor on main knife

- added a vehicle brake drum to slow infeed conveyor motor down

- accuracy within 1/10th of an inch +-

- and for the major upgrade surprise the clutch does not need to turn on every cycle anymore do to CTRIO encoder counter installed on system for timing

-and a nice c-more to upload any length paper you wish to cut


« Last Edit: December 08, 2021, 12:14:19 AM by »
Silly is you in a natural state, and serious is something you have to do until you can get silly again

" Mike Meyers"


  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3657
    • Host Engineering
Re: Example of machine upgrade
« Reply #1 on: December 01, 2021, 12:26:16 PM »

Carry on, Wayne!