News:

  • October 13, 2025, 07:32:38 PM

Login with username, password and session length

« previous next »
Pages: [1] 2

Author Topic: Updated PLC firmware and booter now its not on network anymore  (Read 4916 times)

EDurako

  • Sr. Member
  • ****
  • Posts: 52
Updated PLC firmware and booter now its not on network anymore
« on: December 31, 2020, 11:03:05 AM »
Please help, I updated the firmware and booter to the latest. I have no problems connecting via USB and the PLC is running. However, it is no longer showing on the network. I verified the IP settings are still correct. Any ideas of other things to check or is this a local network issue?

Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #1 on: December 31, 2020, 11:36:13 AM »
Quote from: EDurako on December 31, 2020, 11:03:05 AM
Please help, I updated the firmware and booter to the latest. I have no problems connecting via USB and the PLC is running. However, it is no longer showing on the network. I verified the IP settings are still correct. Any ideas of other things to check or is this a local network issue?

We have an issue with VPNs right now, but I don't know of anyone who has had issues connecting locally. We will be releasing 2.8.3 next week, which should take care of the VPN problem.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

EDurako

  • Sr. Member
  • ****
  • Posts: 52
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #2 on: December 31, 2020, 11:50:50 AM »
I'm local and can't get to it.
Logged

EDurako

  • Sr. Member
  • ****
  • Posts: 52
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #3 on: December 31, 2020, 11:52:07 AM »
I sent you a PM Bob
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #4 on: December 31, 2020, 01:06:31 PM »
FYI to any with similar issues, this is a known bug in 2.8.2. We'll be releasing 2.8.3 shortly to fix this.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3601
  • Darth Ladder
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #5 on: January 01, 2021, 12:08:17 AM »
By 'VPN' you mean any routed connecting that has to go through the PLC subnet gateway?
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #6 on: January 01, 2021, 12:14:06 AM »
Quote from: Controls Guy on January 01, 2021, 12:08:17 AM
By 'VPN' you mean any routed connecting that has to go through the PLC subnet gateway?

Probably.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #7 on: January 01, 2021, 02:25:34 PM »
Quote from: Controls Guy on January 01, 2021, 12:08:17 AM
By 'VPN' you mean any routed connecting that has to go through the PLC subnet gateway?

A bit more detail: When we added the new ECOMEX POM, that forced the inclusion of routing code in the TCP/IP stack. That routing code has the potential to direct packets to the gateway on the opposite port to where the DmD session is. In the interest of keeping local programming working the way it always did, we added a shortcut to force programming comms back out the port they came in on, regardless of whether that 'ought' to be correct or not from a routing perspective. It's never wrong to go back out the port it came in, right? It seemed like a good idea. It wasn't.

I would expect this fix to drop on Monday or Tuesday.

Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

brad0615

  • Newbie
  • *
  • Posts: 2
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #8 on: January 13, 2021, 09:52:16 AM »
Bump. 
Also affected by this issue. 
PLC's are on a 192.168.1.0/24 network
HMI's are on a 192.168.2.0/24 network

HMI and PLC can no longer communicate.
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #9 on: January 13, 2021, 11:35:53 AM »
OS version 2.8.3 that was released today should correct these issues.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

jrayb

  • Full Member
  • ***
  • Posts: 46
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #10 on: January 13, 2021, 09:49:46 PM »
The software isn't on Automation Direct's website. Where can we find it?
Logged

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6126
  • Yes Pinky, Do-more will control the world!
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #11 on: January 13, 2021, 10:37:10 PM »
Quote from: jrayb on January 13, 2021, 09:49:46 PM
The software isn't on Automation Direct's website. Where can we find it?

Run Do-more Designer. It should give you the option of downloading it.
Logged
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

RBPLC

  • Hero Member
  • *****
  • Posts: 585
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #12 on: January 13, 2021, 10:38:28 PM »
If your controller is online you can "check for updates" under the help menu and it will download to the controller. If not, go to https://hosteng.com/ and get it from the firmware section on the left hand side of the page.
Logged

RBPLC

  • Hero Member
  • *****
  • Posts: 585
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #13 on: January 13, 2021, 10:39:14 PM »
BobO,
Did the TIMEPROP termination get fixed as well?
Logged

jrayb

  • Full Member
  • ***
  • Posts: 46
Re: Updated PLC firmware and booter now its not on network anymore
« Reply #14 on: January 14, 2021, 12:11:00 AM »
I guess i'm just a goof. I updated the software but it still has version 2.8.1 at the top of my software
Logged
Pages: [1] 2
« previous next »