• March 23, 2023, 07:57:27 AM

Login with username, password and session length

Author Topic: H2-ECOM100 and EZAutomation panels  (Read 1153 times)


  • Newbie
  • *
  • Posts: 1
H2-ECOM100 and EZAutomation panels
« on: June 07, 2019, 11:24:16 AM »
I have one DL250-1 talking to both local and remote IO (via H2-ERM100/T1H-EBC100 modules) and to EZAutomation panels via H2-ECOM100.  The first EZAutomation panel is not reading the values from the PLC.  (I want to get one working before moving on to the other panels.)  I have the EZAutomation panel set to use the Directlogic ECOM - Rev.C / C driver.  How do I determine the correct id for the PLC - is it "1" because I only have one PLC, "21" because that is the id I assigned to the ECOM in Net Edit, or something else?  Do I need to explicitly write values to and read values from the panels - like the manual calls out for doing when trying to talk from one PLC to another PLC?  Thanks.

ADC Product Engineer

  • Hero Member
  • *****
  • Posts: 270
Re: H2-ECOM100 and EZAutomation panels
« Reply #1 on: June 07, 2019, 01:31:37 PM »
You'd be better served asking EZAutomation.  They developed the driver.  Anything I could suggest would just be a guess.  The panel is the master so it is the one that determines all of those settings.