News:

  • February 01, 2023, 08:18:57 AM

Login with username, password and session length

Author Topic: How to turn on inhibit on CTRIO with Do-More  (Read 1829 times)

davidbgtx

  • Hero Member
  • *****
  • Posts: 215
  • Host be the Most
How to turn on inhibit on CTRIO with Do-More
« on: July 19, 2018, 08:52:13 AM »
Can't figure out how to turn on the inhibit bit on the CTRIO in Do_More Designer. See pics, dropdown box only gives enable capture and reset.
« Last Edit: July 19, 2018, 08:53:50 AM by davidbgtx »

ADC Product Engineer

  • Hero Member
  • *****
  • Posts: 270
Re: How to turn on inhibit on CTRIO with Do-More
« Reply #1 on: July 19, 2018, 09:07:59 AM »
You have Inhibit assigned to physical input "D".  IIRC this is a physical only feature and there isn't any way to do it from the software itself. 

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5788
  • Yes Pinky, Do-more will control the world!
Re: How to turn on inhibit on CTRIO with Do-More
« Reply #2 on: July 19, 2018, 10:40:17 AM »
Physical D input and can only be applied to the first function on a channel.

CTRIO(2) is limited due to the chip it runs on. BRX is far more flexible for stuff like this.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

davidbgtx

  • Hero Member
  • *****
  • Posts: 215
  • Host be the Most
Re: How to turn on inhibit on CTRIO with Do-More
« Reply #3 on: July 19, 2018, 11:39:11 AM »
Wish I could justify replacing all my DL-205 racks (around 50) with BRX, but I'll just have to be satisfied with replacing the CPU's with the H2-DM1E for now. I have put in 2 BRX in new machines and like them!