News:

  • December 05, 2024, 04:34:36 AM

Login with username, password and session length

Author Topic: Using Ethernet switch to add 3 more EBCs  (Read 24632 times)

markbyerley

  • Newbie
  • *
  • Posts: 3
Using Ethernet switch to add 3 more EBCs
« on: July 06, 2018, 08:18:22 AM »
I have an existing DoMore H2-ERM100 module connected to a private ethernet switch with individual CAT5e cables going to remote T1H-EBC100 IO systems, total of 3; each IO system composed of (1)TIK-08ND3,-1 (1) T1K-08TD2-1, (1) T1F-8AD4DA, (1) T1F-14THM.

I am adding 3 identical T1H-EBC100 IO systems and need to extend the network from the last existing EBC100 using an unmanaged network switch.

For various reasons, running cables back to the existing switch is undesirable. Anyone tried this or advice would be appreciated

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 6052
  • Yes Pinky, Do-more will control the world!
Re: Using Ethernet switch to add 3 more EBCs
« Reply #1 on: July 06, 2018, 09:42:24 AM »
Should be fine.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO