News:

  • August 20, 2026, 02:31:06 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: Timer Behavior  (Read 7590 times)

Evilbeard

  • Hero Member
  • *****
  • Posts: 160
Timer Behavior
« on: November 10, 2017, 01:41:17 PM »
I wanted to use the .TT bit on a timer I'm using. As far as I remember right, TT should be 1 as long as the timer is timing and the preset is less than the accumulated value, correct?

Actually, I just noticed, the .TT bit and the .DN bit don't work. Is this a known bug?




edit: I know I can just use the .timing bit in conjunction with the .done bit, but I just like to be efficient. :(
« Last Edit: November 10, 2017, 01:51:28 PM by Evilbeard »
Logged

franji1

  • Bit Weenie
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 3843
    • Host Engineering
Re: Timer Behavior
« Reply #1 on: November 10, 2017, 02:01:14 PM »
Make sure you have the most recent firmware.
Logged

Evilbeard

  • Hero Member
  • *****
  • Posts: 160
Re: Timer Behavior
« Reply #2 on: November 10, 2017, 02:22:18 PM »
Quote from: franji1 on November 10, 2017, 02:01:14 PM
Make sure you have the most recent firmware.

That was weird. It showed as 2.1.0 as my firmware version. I reloaded it and the booter/gate array and power cycled and everything is good. I don't know. :(  Sorry franji1 for the silly problem!
Logged
Pages: [1]
« previous next »