News:

  • May 19, 2024, 12:19:06 AM

Login with username, password and session length

Author Topic: SCALEB  (Read 4472 times)

mhw

  • Hero Member
  • *****
  • Posts: 238
SCALEB
« on: July 04, 2017, 09:12:39 AM »
The SCALEB box in the attached image has "0" in V4500 and is giving an output of 1888 in V4100.What am I doing wrong?

BobO

  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5996
  • Yes Pinky, Do-more will control the world!
Re: SCALEB
« Reply #1 on: July 04, 2017, 09:49:55 AM »
Without doing the math, I don't know for certain, but 0 in will be producing a negative result...but V is unsigned.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO

mhw

  • Hero Member
  • *****
  • Posts: 238
Re: SCALEB
« Reply #2 on: July 04, 2017, 10:47:44 AM »
Thanks Bob, I had assumed that the "Out Min" would clamp it at that value. I put in a comparison contact that will clamp it if the "Input" falls below the "In Min".
Have a happy Brexit 1776!

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3561
  • Darth Ladder
Re: SCALEB
« Reply #3 on: July 04, 2017, 12:49:51 PM »
Quote
Brexit 1776!
   :)
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.