News:

  • June 30, 2026, 02:15:28 PM

Login with username, password and session length

« previous next »
Pages: [1]

Author Topic: HMI compatibility with Do More  (Read 6774 times)

fluidpowerman

  • Full Member
  • ***
  • Posts: 21
HMI compatibility with Do More
« on: March 04, 2015, 04:31:44 PM »
Is anyone familiar with the Rohtek Automation HMI,  I am looking at using it with
the Do-More.  They tell me that it is compatible with the click and Koyo products.
I am looking at the Rohtek eMT3070A1.  Has anyone used this HMI?

Thanks for the Input
Bryan

Logged

Controls Guy

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 3619
  • Darth Ladder
Re: HMI compatibility with Do More
« Reply #1 on: March 04, 2015, 06:00:25 PM »
Haven't used it, but Do-More does have an mode where it can be addressed as a DL-classic (Koyo) PLC, and even better, Modbus RTU and TCP.  Everyone has Modbus, so I bet those guys do too.
Logged
I retract my earlier statement that half of all politicians are crooks.  Half of all politicians are NOT crooks.  There.

b_carlton

  • Internal Dev
  • Hero Member
  • ****
  • Posts: 606
    • thePLCguy
Re: HMI compatibility with Do More
« Reply #2 on: March 04, 2015, 06:46:41 PM »
Went to Weintekhmi.com (the builders of this display)

Downloaded EasyBuilder Pro configuration software

Picture shows just a portion of their huge array of protocols available
Logged
An output is a PLC's way of getting its inputs to change.

fluidpowerman

  • Full Member
  • ***
  • Posts: 21
Re: HMI compatibility with Do More
« Reply #3 on: March 05, 2015, 03:45:12 PM »
Uhh....Thanks Bon.....I should do a little more homework next time....sorry

I appreciate your help ;D
Logged
Pages: [1]
« previous next »