News:

  • February 01, 2023, 11:16:52 AM

Login with username, password and session length

Author Topic: T1H-PBC with Omron PLC  (Read 47511 times)

rsenechal

  • Newbie
  • *
  • Posts: 1
T1H-PBC with Omron PLC
« on: August 21, 2014, 04:43:20 PM »
I am trying to connect a T1H-PBC on a Omron PLC. The link active led is on but the link good and the error led are off. The master configuration seems to be OK (see attached file). Is there something else I need to do to get the node connected?

Greg

  • HostTech
  • Host Moderator
  • Hero Member
  • *****
  • Posts: 660
  • Hmmm...
    • Host Engineering, Inc.
Re: T1H-PBC with Omron PLC
« Reply #1 on: September 08, 2014, 12:18:59 PM »
Hi rsenechal, sorry I missed this one.

If the Token light is off then the T1H-PBC "thinks" there is a configuration error, or he has not yet been configured. But there is nothing else to do to get it up and running provided the node address is correct. Make sure you have the latest firmware for the T1H-PBC and especially the latest version of the GSD file.
There are two types of people in the world; those that can extrapolate from incomplete data sets.