• February 01, 2023, 10:59:48 AM

Login with username, password and session length

Author Topic: CPU access report back  (Read 11334 times)


  • Hero Member
  • *****
  • Posts: 161
CPU access report back
« on: April 12, 2013, 01:08:32 PM »
Can future versions of net edit be modified so that when I test a 250 PLC for CPU access, it reports back a 250 or 250-1. We have more than a 100 PLCs covering a 50 square mile area and this would be a very useful feature.


  • Host Moderator
  • Hero Member
  • *****
  • Posts: 5788
  • Yes Pinky, Do-more will control the world!
Re: CPU access report back
« Reply #1 on: April 15, 2013, 09:17:21 PM »
There may be a way to do it, although I don't immediately know what it is. The normal check for PLC type doesn't distinguish between the 250 and the 250-1, and I don't think DirectSoft distinguishes either.
"It has recently come to our attention that users spend 95% of their time using 5% of the available features. That might be relevant." -BobO