Misc. Designer Questions

[plcnut]

I have about 10 different Dataview's open right now that are auto-hiding in the left side. When I opened Designer I noticed that 9 of them are labeled as Data6, and 1 of them is labeled Data10. Not sure what is going on with it, but I wanted to pass on the info.

[plcnut]

Feature request:
A hot-key for Merge rungs. Or maybe even customizable hot-keys where I could choose a function and assign a hot-key to it. 

[plcnut]

There is a small mistake in the Help file for OPENTCP, The help file related to a variable IP address says:

"Variable Address - the IP address resides in the specified memory location in the Do-more Controller. This can be any readable DWord numeric location. The Hexadecimal equivalent of each octet of the IP Address is stored in a byte of the Variable Address location, in reverse order, for example: IP Address 192.168.000.006 in Hex would be C0.A8.00.06, and stored in the Variable Address location as 0600A8C0."

But when I enter the address as HEX into the DWord location via dataview (Data type set to BCD/Hex), there is no need to reverse it.