Host Engineering Forum
General Category => CTRIO and CTRIO2 => Topic started by: ATU on December 12, 2011, 07:23:42 PM
-
I've got a H2CNTRIO where one of the channels starts to count on its own with the machine stopped. If you power it down and pull it out of the rack and re-seat it, it works fine for about an hour then the counting starts. I replaced the card and the problem doesn't happen (at least not for the past day). The customer never utilized that counting channel until now, so I don't know if the problem was always there or just appeared. I've installed about 30 of these in these machines over the past 7 year and never had one of them go bad until now. Its only about 3-4 years old. Whats the warranty on the card?
-
You'd think the president of the company would know, but I don't. ADC handles all of the warranty stuff at their end. Pretty sure it isn't quite that long though. I'm sure it wouldn't be a difficult repair.
-
we do offer out-of-warranty repair for those. there's a link on our web site - H/W Repair (RMA) - it lists the repair costs for the modules that we repair, and there's a form to fill out to request an RMA#.