Host Engineering Forum

General Category => ECOMs and ECOM100s => Topic started by: Danok on July 07, 2010, 03:14:09 PM

Title: Getting and Setting register values with VB.net
Post by: Danok on July 07, 2010, 03:14:09 PM

I'm wondering if I need KEPWARE, DirectNet or some other server/client software to access DirectLogic CPU's registers. I'm thinking I do but I'm new at Direct Logic programming and need a little assistance.

Title: Re: Getting and Setting register values with VB.net
Post by: b_carlton on July 07, 2010, 03:58:41 PM

You will need some type of communication server. PC-DSDATA available at http://www.automationdirect.com/adc/Shopping/Catalog/Software_Products/DSData_Server_(OPC_-a-_DDE)/DSData_Software (http://www.automationdirect.com/adc/Shopping/Catalog/Software_Products/DSData_Server_(OPC_-a-_DDE)/DSData_Software) and produced by the 'hosts' of this forum would be a good choice.

Oh, and I voted for the first choice, I thought the second too wordy.

Title: Re: Getting and Setting register values with VB.net
Post by: Controls Guy on July 07, 2010, 04:44:58 PM

I petition for the addition of a third choice:  "What(theheck)"