Host Engineering Forum

General Category => CTRIO and CTRIO2 => Topic started by: mhw on May 26, 2010, 09:08:31 PM

Title: Update current count
Post by: mhw on May 26, 2010, 09:08:31 PM

EBC in terminator with T1H-CITRO.
Configured as a 4X Quad counter.
205 Base with 260PLC and ERM.

How can I put a number in the current count register of the CITRO from ladder?
If it is by using the WT box then what do I use for the base and slot number?

Thanks,
Mike

Title: Re: Update current count
Post by: Greg on May 27, 2010, 09:05:27 AM

To write a current count to the internal register of the CTRIO requires Shared RAM access. It is not possible to do this in your configuration because ladders cannot tell the ERM to access the Shared RAM of CTRIO in EBC base.

(Refer to CTRIO FAQ0013 here ... http://www.hosteng.com/FAQFiles/CTRIO.htm#FAQ0013 (http://www.hosteng.com/FAQFiles/CTRIO.htm#FAQ0013)).