Host Engineering Forum

General Category => DirectSOFT => Topic started by: dasmith on March 18, 2010, 01:31:19 PM

Title: linear positioning rod
Post by: dasmith on March 18, 2010, 01:31:19 PM

I'm new to direct automation could someone tell me how to program a linear positioning rod into the logic.

Title: Re: linear positioning rod
Post by: b_carlton on March 18, 2010, 02:49:23 PM

You will have to provide ALL the information about the 'linear positioning rod' and how it is connected to the PLC before anyone can provide any helpful information about the programming.