Host Engineering Forum

General Category => General Discussion => Topic started by: MKL on June 11, 2007, 04:34:46 PM

Title: Revision History
Post by: MKL on June 11, 2007, 04:34:46 PM

hi,

on the website there's a new firmware available for the h0-ecom100: version 4.0.173

but what's new in this version? because the revision history is only to 4.0.169

Title: Re: Revision History
Post by: MikeS on June 12, 2007, 10:19:29 AM

we're trying to fix this now, we're having some firewall difficulties with our web publishing software. in the mean time, here's the revision history for this ecom100 firmware release:

• Added 'ECOM Advanced Settings' page to the Web browser configuration page. In previous firmware versions you could only adjust these settings via NetEdit3.
  
• Fixed a problem with the Web browser configuration page where sometimes only a portion of the page would show up in the Web browser.
  
• Added favicons to the Web browser configuration page.
  
• If the ECOM100 receives a Modbus/TCP request for a value that is at either endpoint of the PLC's memory mapped ranges, the ECOM100 would erroneously report the value was out of range.
  
• If the ECOM100 is operating as a Modbus/TCP server, the ECOM100 would not report the correct error value for a watchdog timeout error from one of it's clients.
  

Title: Re: Revision History
Post by: MKL on June 12, 2007, 12:26:50 PM

ok thnx for the info :)