Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Topic started by: pjkramlinger on November 19, 2026, 11:28:43 AM

Title: HTTPCMD post fails when buffer file is > 10,000 bytes
Post by: pjkramlinger on November 19, 2026, 11:28:43 AM
An HTTPCMD instruction configured as a post to send data to an API has a numeric buffer file set up for 65,000 bytes (the documented capacity of the instruction).
It works well until the buffer is over 10,000 bytes when it consistently fails. Any ideas?
Title: Re: HTTPCMD post fails when buffer file is > 10,000 bytes
Post by: franji1 on November 19, 2026, 12:43:29 PM
You can temporarily turn on some detailed diagnostic messages that get sent out by the PLC and monitored by DmLogger utility.
Debug->Do-more Logger

Look at Help Topic  DMD0283 Do-more Logger (Network Message Viewer)
Turn on Level 2 logging (remember to turn it off!!!)

Post what you see back here