Host Engineering Forum
General Category => Do-more CPUs and Do-more Designer Software => Topic started by: plcnut on August 17, 2026, 09:38:12 PM
-
Hello gentlemen!
Long-time no-see.
I was wondering if there is any way to increase the polling time for EtherNet/IP devices in the scanner.
I am specifically using the Murr 54631 Remote IO blocks which are capable of 1ms on the network, but I am limited in the BRX to 10ms RPI.
I would like to take care of packet loading myself and get better performance from my RIO. I can turn down the polling speed for my drives and run my IO faster.
Thanks for your consideration!