Host Engineering Forum
General Category => Do-more CPUs and Do-more Designer Software => Topic started by: FAHOutdoors on September 23, 2025, 10:47:39 PM
-
Unsure if a dedicated post is the best way to ask for a feature request, but I noticed on the BRX CPU's with built in IO (BX-DM1E-10ER3D in this specific case) it would not let me set the analog input to 0-20 mA, which is what I like to do for all my 4-20 mA signals for better troubleshooting. It lets me select -20 to 20 mA and 4-20 mA so I'd imagine there's no technical limitation to why I cant pick 0-20 mA. Would also like to be able to choose 16 bit unipolar data, again to match what I typically do on other channels on dedicated cards.