Host Engineering Forum

General Category => General Discussion => Topic started by: scottsutton on February 02, 2022, 06:11:31 AM

Title: 8 Axis motion control with BRX?
Post by: scottsutton on February 02, 2022, 06:11:31 AM

I am just wanting to verify that a BX-DM1E-36ED23 along with a BX-HSIO4 can support 8 axis of line driver output for servo control? I have done several systems with the Do-More with 3 axis but I have a project that now requires 8.

Thanks,
Scott Sutton

Title: Re: 8 Axis motion control with BRX?
Post by: ADC Product Engineer on February 02, 2022, 08:58:14 AM

Shouldn't be a problem.  You can stuff the entire rack full of HSIO if you want.

Title: Re: 8 Axis motion control with BRX?
Post by: franji1 on February 02, 2022, 09:14:31 AM

FYI...

The closed loop capabilities are within a single HSIO module - NOT between HSIO modules.  For example, you can't use an AXFOLLOW with a Master on one HSIO card and the Slave on a different HSIO card.