Host Engineering Forum

General Category => Do-more CPUs and Do-more Designer Software => Do-more Programming Examples => Topic started by: www.SystemsIntegrator.mobi on December 01, 2021, 12:18:35 PM

Title: Example of machine upgrade https://www.theheimgroup.com/
Post by: www.SystemsIntegrator.mobi on December 01, 2021, 12:18:35 PM

hello,

Example of machine upgrade of model:

https://www.theheimgroup.com/remanufactured/



currently in production with Do-more



video of machine running

https://bluemotorbike.tripod.com/systemsintegrator/systemsintegrator/heim.mp4




cool features:

Do-more program can handle:

- under and over pressurized air balancing cylinder compensation from operator error that may cause an over or under shoot in paper length

- broken main bearings on travel knife

- erratic main encoder wheel

- oversized motor on infeed conveyor

- under sized motor on main knife

- added a vehicle brake drum to slow infeed conveyor motor down

- accuracy within 1/10th of an inch +-

- and for the major upgrade surprise the clutch does not need to turn on every cycle anymore do to CTRIO encoder counter installed on system for timing

-and a nice c-more to upload any length paper you wish to cut



Thanks,

Keith

Order@systemsintegrator.mobi

Title: Re: Example of machine upgrade https://www.theheimgroup.com/
Post by: franji1 on December 01, 2021, 12:26:16 PM

Cool!

Carry on, Wayne!